AureX Clean Agent 4 KG (MS Body)

Clean Agent 4 KG Fire Extinguisher

Quick Specs

Body Type: Mild Steel (MS Body)
Capacity: 4 KG
MAP Agent: Default
Compliance: IS 15683:2024
Model: AICA-4001
DOWNLOAD ORIGINAL PDF ENQUIRE NOW

Performance & Technical Specifications

Model Number AICA-4001
Hydraulic Pressure Test 35 BAR
Bursting Pressure Test 60 BAR
Working Pressure 15 BAR
Operating Temperature Range -30°C to +60°C
Type Test Standard IS 15683 : 2024

Standard Material of Construction

Cylinder 1.4 MM Mild Steel
valve Brass
valve Type CE (NRV) / Normal
O-Ring Rubber
Syphon Tube Plastic
Handle & Lever Mild Steel
External Coating Epoxy Powder Coating
Corrosion resistance Anti-Corrosive Coating

Key Product Features

Eco-Friendly Clean Agent Gas (Zero ODP, Low GWP)
Leaves No Residue (Non-conductive, Safe for Electronics)
High Suppression Efficiency on Class A, B, C & Electrical Fires
Nickel-plated Brass Valve with Pressure Indicator
Epoxy Polyester Powder Coating for Extra Protection
Refillable & Easy to Service

Operating Method (P.A.S.S. Protocol)

P
Pull the Pin

Break the tamper seal and pull safety pin.

A
Aim low

Aim nozzle at the base of the fire.

S
Squeeze

Squeeze handle lever to discharge agent.

S
Sweep

Sweep side to side until fire is out.

Testing & Quality Assurance

  • Hydrostatic Evaluation: Tested at 35 BAR for structural safety.
  • Burst Endurance: Cylinder burst limit evaluated at 60 BAR.
  • Leakage Integrity: Tested rigorously to prevent pressure loss.
  • Corrosion Resistance: High-quality anti-corrosive external powder coating.

Serviceability & Maintenance Recommendations

Storage Condition Cool & Dry Place
Service Frequency As Per IS 2190 (Annual Maintenance Recommended)
Refilling Interval Every 5 Years
Operational Lifespan Approx. 10 Years (Under optimal conditions)